user community  
      
 
 
 DDN Release 5.1:
 System Requirements
 Installation - UNIX
 Installation - Windows
 Environment - UNIX
 Environment - Windows
 Documentation 5.1

 information highlight:
This web page is no longer maintained.
Please visit 3ds.com or contact your local representative.
Hannover, June 2010

This web page is no longer maintained.
Please visit 3ds.com or contact your local representative.
Hannover, June 2010

System Requirements
home > products > ICEM DDN > DDN Releases > DDN Release 5.1 > System Requirements
 

ICEM DDN 5.1 System Requirements

Operating System Requirements

Operating System Supported Hardware
IRIX 6.5 SGI workstations with R4000, R4400, R4600, R5000, R8000, and R10000 processors, 
SGI Octane workstations, SGI O2 workstations

Windows NT 4.0

A minimum of 133 MHz Pentium or equivalent, SGI NT PC machine

Windows 95

A minimum of 133 MHz Pentium or equivalent

Windows 2000 Prof.

A minimum of 133 MHz Pentium or equivalent

 Windows XP Prof.

Pentium 4 Processor  or equivalent

Patch SG0002193 is required for SGI Octane workstations.

Additional Requirements

ICEM DDN 5.1 requires a new License Manager:

  • With ICEM DDN 5.1 you have to run FlexLM 8.3.11.
    This will be distributed on the release cdrom.

Hardware Requirements

Memory Requirements for ICEM Design Drafting on O2 andOctane machines:
  • 64 MB is adequate for all functions of DDN except for complex instancing orinstancing of more than 200 simple parts.
  • 128 MB is recommended for complex instancing or instancing of more than 200simple parts.

Memory Requirements for ICEM Design Drafting on other IRIXplatforms:

  • 48 MB is adequate for all functions of DDN except for complex instancing orinstancing of more than 200 simple parts.
  • 64 MB is recommended for complex instancing or instancing of more than 200 simpleparts.

Memory Requirements for ICEM Design Drafting on Windows platforms:

  • 64 MB RAM is adequate for all functions of DDN except for complex instancing orinstancing of more than 200 simple parts. 
    128 MB RAM is recommended for complexinstancing or instancing of more than 200 simple parts.

Swap Space Requirements for ICEM Design Drafting

  • 200 MB Swap Space is recommended.

Certified graphic boards

  • ICEM DDN has been certified with all graphics adapters which support the OpenGL functions.
Additional Requirements for ICEM Design Drafting on Windowsplatforms:
  • A typical ICEM DDN installation requires about 120 MB of hard disk space. Apaging system (virtual memory) file of at least 100 MB is also required (150 MB ormore recommended). Consult your Windows documentation for the procedures tochange these system settings.
  • This version of ICEM DDN includes OpenGL capabilities. ICEM DDN requires agraphics adapter with at least 4 MB of video RAM
    (8 MB or more for 1280x1024pixels). We recommend a resolution of 1024x768 or 1280x1024. DDN requires atleast 65535 colors.
  • screen resolution: 1024x768 or 1280x1024

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
   legal information       © 2010 Dassault Systemes - All rights reserved